We’ve all been there, or we know someone who has. It’s the middle of the summer, approaching the hottest part of the day. You’re going about your day when you suddenly notice it. Your air conditioning has stopped working, and it’s only going to get hotter. When this happens, the smart move is to set up a service call for air conditioning repair in Gainesville, right?
Well…maybe. There are absolutely times when a repair visit is completely unavoidable. While we understand that, we also understand that most people would rather not spend the money unless it’s really necessary. In fact, there are a few things you can do on your own to troubleshoot a potential problem. Read on to learn a few handy DIY air conditioning repair strategies.
- If your a/c unit is as dead as a doornail, check your breaker. A solid hint that this is the problem is if you have lights or other appliances that aren’t working. If that’s the case, the breaker might have tripped and the air conditioner won’t work. Always check that, because the last thing you need is to pay a service fee for someone to just flip a switch.
- The thermostat is an important part of your a/c system. Some of them are battery operated, and if there’s an issue, the thermostat might just need a battery change. Try setting the temperature for just below what your room temperature is at. Also, make sure it’s not set to just blow the fan, or that it hasn’t been accidentally turned off.
- Lots of times, issues are easily avoided with the a/c by just changing the filter on a regular basis. When the filter becomes filthy, it can impede easy air flow and greatly reduce the operating efficiency. Sometimes, if your system gets seriously clogged, it can actually cause it to ice up. But when you change the filters on a regular basis, you shouldn’t have any problems.
- Speaking of a system icing up, you’re probably wondering how to deal with that. It’s easy, and there are 2 ways to do it. If you’re not in a hurry, just turn your air conditioning unit off completely, and the ice will melt on its own. If you need it done faster, turn the cooling off and just let the fan run. This will melt the ice much faster.
- Sometimes, the problem is just that your air conditioning needs a good cleaning. First, make sure to turn the unit off. Check the outside unit and clean the fan blades, and also remove any debris and gunk that may have gotten trapped inside. You can also clean the condenser fins, but remember that the fins and blades are fragile and can break and bend easily, so clean them carefully.
- This isn’t for everyone, but if you’re okay with a trip into your attic, check the air ducts to make sure the airflow isn’t blocked. If the ducts are dirty, or if something is impeding the air, take the time to give it a good cleaning. Keep in mind that registers can accidentally get partially or fully closed. A quick check will let you know if air can make it through.